servo gear reducer

3 Backlash Levels, as low as 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal velocity reducer. It utilizes 52100 grade bearing metal on all of its speed reduction components. It really is offered with a full two year warranty, not limited by hours of operation, and is able to endure abuse that would break one’s teeth of ordinary quickness reducers.
The EP 3000, easily available with inputs for both servo and induction motors, includes a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Provided in two backlash ratings and multiple mounting options, the EP 3000 has a design tough enough for both servo and regular induction electric motor applications. The initial two piece pin housing design guarantees output shaft backlash ratings of less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to reach negligible backlash, maintain outstanding rigidity, and increase control stability so that the required output motion could be easily achieved. The design is truly a unique concept, employing a full contact screw-like tranny for high efficiency and elimination of put on. The unit provides optimum compactness using orthogonal axes and includes a large hollow shaft for flexibility.

Wide variety of servo gearboxes, made to fit virtually all servo motors on the market
Designed for the best torsional stiffness and the lowest angular backlash, to get the utmost torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution thanks to a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical products) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is pleased to announce the expansion of our selection of Servo Reducers, today offering five degrees of precision to meet up any program requirements. The five levels of precision obtainable allows a machine developer to select the mandatory reducer precision to meet up their needs and their spending budget. They can be purchased in both in-range and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Usual applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the entire reducer range to install virtually any servo engine and the hollow bore output can be used to install output shafts, pinion shafts, or other drive elements.
These reducers are typically selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These routine forces depend on the powered load, the quickness vs. period profile for the routine, and any other exterior forces functioning on the axis. For more selection details, please follow this PDF link.
For application & selection assistance, please call, fax or email us. The application information will be reviewed by our engineers, who will recommend the best solution for the application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular design allows for configurations with motor insight flange and output pinion for rack and pinion drives, as well as solid output shafts, Hollow bore result, and input shafts for all other positioning applications. The modular style allows for universal mounting of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange via an adaptor package. As the gears are naturally angled, they lead to a short total amount of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be constructed on the gear’s output side.
Built with a straightforward and robust style, the series provides gearing ratios that range between 6:1 to 75:1. The user may also customize the materials through the order, so as to match the gear to its intended app.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with double shaft, right position shaft and right position output, as well as a full range of adapters for engine mounting, making them with the capacity of meeting certain requirements of actually the most different applications. They are created for make use of with integrated servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used in combination with other EP motor types. This range of products is founded on years of encounter and represents the end result of a decade-long study targeted at improving performance.
Optimum precision and dynamics, coupled with exceptional torque density, are the key requirements specific for reliable servo gearboxes used. EP provides servo gearboxes for just about any software and any efficiency range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for creativity and the best levels of precision.
Worm gear reducers provide market advance solution with efficiency and flexibility. Low number of basic models can be applied to an array of power ratings guaranteeing top performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical tools. When the motor quickness must be reduced, the output torque increases and send torque completely to the application. We believe that clients will appreciate our equipment reducer to attain their demand. Just check out EP, you can get more information about servo gearheads, servo gearboxes, and equipment reducers. We always keep going forward for your support.
Plug the Rate Reducer in to the desired channel of your receiver, and plug the lead from your servo (or servo wye) in to the male servo lead from the circuit panel. The set screw on the blue trim pot, located close to the top of the main circuit board, can be used to control the speed of the servo. Switch the set screw fully clockwise (CW) for normal servo speed with no speed reduction, completely counter-clockwise (CCW) for maximum speed reduction, or any place in between for partial velocity reduction. The crimson LED indicates three feasible conditions: Slower Blinking = No Transmission; Solid On = No Speed Reduction; Fast Blinking = Reduced Swiftness Setting
Please note that if you make any alter to the speed setting while the receiver is on, you need to cycle capacity to the receiver (change if off and back again on) for the brand new speed establishing to take impact. This circuit can also be utilized in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in opposite directions for correct function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This device will only work on a regular, proportional servo. You won’t focus on a retract-type servo, as they do not acknowledge any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter that includes this function, as their design and electronics don’t allow it. Examine the FAQ page to find out more.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a far more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the swiftness of your servo from super-slow motion to no speed decrease at all, with an nearly infinite quantity of positions in between. Maximum reduction time for a servo to visit 90 degrees is about 14 seconds, minimum period (no reduction) is simply the normal swiftness of the servo. Ideal for reducing or getting rid of the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control several servo by usage of a regular servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit will NOT reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging devices, gantries, injection molding machines, pick and place, and linear slides.Offered in concentric shaft, right position solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to very easily mount to any kind of manufacturer’s servo engine. The EP Series helical gears possess slanted teeth in comparison to spur gears with directly cut teeth, creating a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the best possible versatility and cost-efficiency because not every application requires high-performance components.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, simple output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

Want everyday information letters concerning servo gear reducer? Please visit the site.


Recent Posts

worm reducers

As one of leading worm reducers manufacturers, suppliers and exporters of mechanical products, We offer worm reducers and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducers