China Zlyj 250 Extruder Hard Tooth Surface Gearbox cast iron worm gearbox

Solution Description

one) Modest quantity
2) Large transmission torque
three) Substantial efficiency
4) Reduced consumption.

Product Description :
ZLYJ gearbox collection are transmission devices, which are specially made for one-screw extruder with substantial precision, challenging equipment surface, accompany with thrust. Adopting the technological specifications stipulated in JB/T9050.1-1999, all CZPT gearboxes are designed appropriately.
Principal Features:
1. The substance of equipment is the higher toughness alloy steel, it is made by carburizing, quenching (and other heat remedy), gringding process at very last. The equipment is in large precison ( 6 quality ) and high hardness ( reaches HRC54-62). In addition to, it characteristics minimal sound when operating.
two. It contains large bearing potential thrust, which is carried out trustworthy and can withstand more substantial axial thrust.
3. All the things are handled by forced lubrication and cooling technique other than extremely number of small specification products.
four. CZPT sequence gearbox is adopted by six-side processing box. Its typical installation is horizontal, but can also be changed to vertical set up in accordance to customer’s requirment.
5. Effectiveness transmission, minimal sound, long operaton time.

Main parameters :

Type Spec Input Energy(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 five.five 800 a hundred 525 35 Ø35 twenty five:01:00
133-eight 8 800 a hundred 764 39 Ø50 twenty five:01:00
146-ten eleven a thousand 100 1050 fifty four Ø55 twenty five:01:00
173-ten 18.5 900 90 1962 one hundred ten Ø65 25:01:00
two hundred-twelve.5 30 one thousand 80 3581 155 Ø75 25:01:00
225-12.5 forty five a thousand 80 5371 one hundred eighty Ø90 25:01:00
250-sixteen fifty five 1120 70 7503 192 Ø105 25:01:00
280-sixteen seventy five 960 sixty 7643 258 Ø110 25:01:00
315-16 85 960 sixty 13528 287 Ø120 twenty five:01:00
330-16 a hundred and ten 960 60 17507 360 Ø135 twenty five:01:00
375-sixteen 132 960 sixty 21008 390 Ø150 twenty five:01:00
395-sixteen 185 960 sixty 29442 400 Ø160 twenty five:01:00
420-16 160 960 sixty 31831 430 Ø160 twenty five:01:00
420-16 220 960 sixty 31831 430 Ø170 twenty five:01:00
450-20 213 a thousand sixty 40640 500 Ø160/Ø170 twenty five:01:00
560-17 540 1000 50 84034 seven-hundred Ø200 25:01:00
630-ten 540 1000 fifty 15712 770 Ø250 25:01:00

Our gain :
A> long time encounter and historical past
B> long time nitriding treatment method and heating remedy by alone
C>advanced Fanuk series CNC pc-controlled milling machines
D>depth gap drilling equipment in 18meters length, which ensure the straigtnss of barrel within.
E> CAD drawing confirmation prior to start off generating
F> Prompt after sale service
G>Land owner and registration capital twenty five, 000, 000RMB

Our organization :
ZHangZhoug CZPT plastic machinery co.,ltd is located in HangZhou HangZhou metropolis with brand name of PYM(Former HangZhou CZPT equipment screw co.ltd because 1988). The business is specialised in creating screw barrel, gearbox CZPT collection, t die, filter and extruder device. It has turn out to be 1 of the biggest provider of primary areas in HangZhou city which is the basement of plastic machinery.

 

FRQ:
one.Q:What are we?

A:We are factory, with license of import and export goods by ourself.

two.Q:How to get to us? 

A:The closest airport is HangZhou airport, and the closest teach station is HangZhou station.

 

Warmly welcome to speak to us by below ways: 

 

 

 

Welcome to our organization .

 

 

 

 

 

 

 

 

US $600-2,200
/ Piece
|
1 Piece

(Min. Order)

###

Function: Speed Reduction
Type: Worm Gear Box
Brand Name: Pym
Input Speed: 800
Output Torque: 525
Screw Design: Single-Screw

###

Customization:

###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00
US $600-2,200
/ Piece
|
1 Piece

(Min. Order)

###

Function: Speed Reduction
Type: Worm Gear Box
Brand Name: Pym
Input Speed: 800
Output Torque: 525
Screw Design: Single-Screw

###

Customization:

###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
worm reducer

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Zlyj 250 Extruder Hard Tooth Surface Gearbox     cast iron worm gearboxChina Zlyj 250 Extruder Hard Tooth Surface Gearbox     cast iron worm gearbox
editor by czh 2023-01-16

Recent Posts

worm reducers

As one of leading worm reducers manufacturers, suppliers and exporters of mechanical products, We offer worm reducers and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducers