China manufacturer Best Selling S37-97 Series Helical Worm Gear Speed Reducer 90 Degree Gear Box manufacturer

Product Description

Company  Profiles

     
-We are a leading gear motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
 

 

  • helical gear motor
  • helical bevel gear motor
  • parallel shaft helical gear motor
  • helical worm gear motor
  • hoist drive
  • heavy-duty helical gearbox
  • heavy-duty helical bevel gearbox
  • gear motor for car parking system
  • sprial bevel gearbox

Product Description
 

E series gear motor is combined with helical gear and worm gear. It is 90° for input and output shaft.

Mounting position: footed mounting, flange mounting and shaft mounting etc.

Technical data:

Output speed:0.12~397rpm

Rated output torque:10~4200N*m

Motor power: 0.12~22KW

Product Show

Product Specification

 

Product features
1. Economical operation, low noise and high permitted overhung loads.
2. Due to their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and speed requirements.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material  20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input /output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— ZheJiang or other brands requested
E —- series helical-worm gear motor
E-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37 20k6 80j6 80/120 0.12~1.5 6.72~160 105 8.4~397
E47 25k6 100j6 110/160 0.12~1.5 7.5~212 190 6.6~192
E57 30k6 112j6 130/200 0.18~3.0 7.5~212 340 6.5~194
E67 35k6 140j6 130/200 0.25~5.5 7.45~215 565 6~189
E77 45k6 180j6 180/250 0.37~7.5 7.9~257 1200 3.5~177
E87 60m6 225h6 250/350 0.55~15 8.52~277 2600 1.0~171
E97 70m6 280h6 350/450 1.5~22 8.26~282 4185 4.9~177
E- series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
E37D17 20k6 80j13 80/120 0.12 110~202 89 6.8~13
E47D17 25k6 100j13 110/160 0.12~0.18 180~438 255 3.2~7.4
E57D17 30k6 112j13 130/200 0.12~0.25 131~655 311 2.1~9.9
E67D37 35k6 140j13 130/200 0.12~0.37 246~1363 600 1.0~5.6
E77D37 45k6 180j13 180/250 0.12~1.1 219~3540 1230 0.39~6.4
E87D57 60m6 225h13 250/350 0.12~1.5 205~7643 2810 0.18~6.9
E97D57 70m6 280h13 350/450 0.12~3.0 179~11267 4420 0.12~7.7
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.

Package

Plastic bag + wooden carton

Certificate

FAQ

Q: Can you print other colors?
Yes. Customized color can be printed on the gear motor according to your requirements.
Q: Is that factory price?
Yes. We assure you all prices are based on factory.
Q:  What is the life span? what is the guarantee
The lifespan of gear motor can reach 5-20 years depending on different working conditions .The guarantee time is 1 year after delivery.
Q: What documents are available?
A full range documents including structural drawings, packing list, installation manual and relative certificates can be provided. Moreover, customs declaration is provided. We provide one-stop service for you. 
Q: Is it able to customized?
yes, we could re-design and produce the gear motor as your requirements if the quantity is large.

How to Install and Align a Worm Reducer Properly

Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:

  1. Preparation: Gather all

    Does a Worm Reducer Require Frequent Maintenance?

    Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

    • Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
    • Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
    • Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
    • Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
    • Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
    • Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
    • Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

    While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

    the necessary tools, equipment, and safety gear before starting the installation process.

  2. Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
  3. Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
  4. Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
  5. Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
  6. Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
  7. Lubrication: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
  8. Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
  9. Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.

It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.

Application: Motor, Machinery, Transmission Equipment
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

Can a Worm Gearbox Provide High Torque Output?

Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.

The torque output of a worm gearbox is influenced by several factors:

  • Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
  • Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
  • Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
  • Lubrication: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
  • Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.

Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.

China manufacturer Best Selling S37-97 Series Helical Worm Gear Speed Reducer 90 Degree Gear Box   manufacturer China manufacturer Best Selling S37-97 Series Helical Worm Gear Speed Reducer 90 Degree Gear Box   manufacturer
editor by CX 2023-08-31

Recent Posts

worm reducers

As one of leading worm reducers manufacturers, suppliers and exporters of mechanical products, We offer worm reducers and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducers