China Good quality Smrv150 90 Degree Gearbox Motovario-Like Nmrv Series Worm Gear Reducer Gearbox with high quality

Product Description

Technical Features

  The high degree of modularity is a design feature of SRC helical gearboxes range. It can be connected respectively with motors such as normal motor, brake motor, explosion-proof motor, frequency conversion motor, servo motor, IEC motor and so on. This kind of product is widely used in drive fields such as textile, foodstuff, ceramics packing, logistics, plastics and so on. It is possible to set up the version required using flanges or feet.
 

 

Products characteristics 

  SRC series helical gear units has more than 4 types. Power 0.12-4kw; Ratio 3.66-54; Torque max 120-500Nm. It can be connected (foot or flange) discretionary and use multi-mounting positions according to customers requirements.

Ground-hardened helical gears;

Modularity,can be combined in many forms;

Aluminium casing, light weight;

Gears in carbonize hard, durable;

Universal mounting;

Refined design,space effective and low noise

Structure feature

Model illuminate

1

Code for gear units series

2

No F code means foot mounted.With F code B5 flange mounted.With Z code B14 flange mounted

3

Specification code of gear units 01

4

I,II,III,B5 Output flange specification,default I not to write out is ok  

5

IEC: Input flange  HS: shaft input

6

Transmission ratio of gear units

7

M1:Mounting position, default mounting position M1 not to write out is ok

8

Position diagram for motor terminal box,default position o°(R) not to write out is ok

9

No mark means without motor   Model motor(poles of power)

10

Voltage – frequency

11

Coil in position for motor, default position S not to write out is ok

 

 

4.2 Rotation speed n

 

n1 Gear units input speed

 

n2 Gear units output speed

 

  If driven by the external gearing,1400r/min or lower rotation speed is suggested so as to optimize the working conditions and prolong the service life.Higher input rotation speed is permitted, but in this situation,the rated torque M2 will be reduced
   

 

4.5 Service factor fs

 

The effect of the driven machine on the gear unit is taken into account to a sufficient level of accuracy using the service factor fs. The service factor is determined according to the daily operation time and the starting frequency Z. Three load classifications are considered depending on the mass acceleration factor. You can read off the service factor applicable to your application in following figure. The service factor selected using this diagram must be less than or equal to the service factor as given in the performance parameter table.

 

* starting frequency Z: The cycles include all starting and braking procedures as well as change overs from low to high speed

 

SRC02..(HS)  Performance parameter

 

kw

Output speed

Torque

Speed ratio

fs

Model

IEC

0.37

16.7rpm

204N.M

54

1.0

SRC02

80B5/B14

 

 

Helical gearbox outline dimension heet

Foot Code U V V1 V2 V3 W X X1 Y Z
B02 18 107.5 60 130 11 136 155 100 17
M02 25 85 110 120 9 112 145 80 15
M01 18 80 110 120 9 118 145 80 15
B01 18 87 50 110 9 118 130 90 15

SRC helical gearbox with motor mounting position and terminal box orientation

Package
1 pc / carton,several cartons / wooden pallet

Application: Motor
Layout: Cycloidal
Hardness: Soft Tooth Surface
Samples:
US$ 317.6/Piece
1 Piece(Min.Order)

|

Order Sample

SMRV150-20-132S4
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

worm gearbox

Maintenance Tips for Prolonging the Life of a Worm Gearbox

Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:

  • Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
  • Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
  • Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
  • Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
  • Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
  • Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
  • Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
  • Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
  • Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
  • Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.

By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.

worm gearbox

Does a Worm Reducer Require Frequent Maintenance?

Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

  • Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
  • Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
  • Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
  • Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
  • Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
  • Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
  • Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

worm gearbox

How to Select the Right Worm Gearbox for Your Application

Selecting the right worm gearbox for your application involves careful consideration of various factors:

  • Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
  • Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
  • Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
  • Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
  • Mounting Options: Determine the mounting orientation and configuration that best suits your application.
  • Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
  • Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
  • Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
  • Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
  • Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.

Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.

China Good quality Smrv150 90 Degree Gearbox Motovario-Like Nmrv Series Worm Gear Reducer Gearbox   with high quality China Good quality Smrv150 90 Degree Gearbox Motovario-Like Nmrv Series Worm Gear Reducer Gearbox   with high quality
editor by CX 2023-10-11

Recent Posts

worm reducers

As one of leading worm reducers manufacturers, suppliers and exporters of mechanical products, We offer worm reducers and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducers